Model 6200 Lightweight Inertial Surface
Analyzer LISA
The Ames lightweight road profiler gives you the
advantage of profiling your pavement projects much faster and more
efficiently. The on-board Panasonic Toughbook gives you immediate
results and allows the operator to view the profile on the
computer screen in real time. State and Federal agencies also use
the lightweight pavement profiler to monitor the condition of existing
roads. An effective ground pressure of only 6 p.s.i. allows the
Model 6200 to get on a
job site quickly after surface laydown.
The Ames lightweight road profiler was the first to be certified
in Texas. This rigorous certification is indicative of the
quality of the results that the LISA can provide for you.
Certifications similar to this may soon be a requirement in your
state. For more information see the proposed AASHTO PP 51-02
document.
The use of the popular John Deere Gator Utility Vehicle means
that vehicle service is widely available worldwide. More
Gators are sold than any other vehicle in its class, and it is made
in America.
The Model 6200 LISA
profiler is the system of choice of many of the top pavings
contractors throughout the country. Our profiler provides
accurate profile data in a format that can be used to make
immediate decisions in the field to improve the quality of your
paving operation.
The Model 6200 LISA is a Class I
road profile measuring device (ASTM E950-98). The laser
sensor is immune to pavement color - it works equally well on
new or existing concrete or asphalt surfaces.
Computer hardware:
IBM compatible system with daylight readable screen
Panasonic Toughbook 1.66 MHz Intel Core Duo laptop with a 80 GB hard drive and 512MB of RAM
Color 13.3" SVGA anti-reflective, outdoor readable touch screen display
Wireless or RS-232 serial port connection from laptop to data acquisition computer
RS-485 serial network between data acquisition computer and all modules
Compact Flash PC card with 1 GB memory for fast file transfer
High speed (2 inches/second) thermal strip printer for plotting
pavement profile at job site
All electronic components housed in water resistant and dust tight enclosures
Field replacement of any component does not require re-calibration of
the system
Capable of connecting a second sensor to profile both wheel tracks simultaneously
Second sensor is field installable, and can be installed later without modification if you choose
System Information:
